Weld in 700 & 900 series front DC coil over struts short

New Improved design and finish

Weld in Shortened Front coilover struts for Volvo 7 and 900 series fitted with 70mm ID coilover springs. Supplied with bolt in camber plates and double bearing top mounts to reduce steering effort.

You need to remove the old strut tubes from your hubs and weld in the threaded cups.

These coilovers are built with a shorter closed length and shorter open length to allow for extreme lowering. Lowering range between 50 and 150mm

The spring platform is adjustable to change ride height and set corner weights..

1. Front units adjust bump and rebound from a single control knob on the top of the unit. 24point adjustment

2. Double height adjustable

Fitting notes

Tracking must be set after fitting

Welding must be completed by a competent welder. Classic Swede can not take responsibility for failure caused by poor quality welding.